There are no products listed under this category.
Welcome to the #1 Online Parts Store!
Welcome to the #2 Online Parts Store!
Welcome to the #3 Online Parts Store!
LaserGrade EdgeLite Sign Starter Kits are now available in Flour - Yellow, Blue, Red, Lime Green or Orange. Now you can take a piece of ChemCast Flour Acrylic, reverse engrave the acrylic and use our home made Plastic Bending Strip Heater to form a stand-up sign, http://www.lasersketch.com/strip%20heater.htm to bend the plastic after engraving to make your own POP Sign or Custom Signs for your customers. The bender is easy to fabricate at a fraction of the cost of a commercial bender. All sign stock comes with the corners rounded and a fire polished edges, ready for reverse engraving, snap on a EdgeLite Strip and plugging in to 120vAC. Flour - Red, Yellow and Blue ChemCast Acrylic Plastic with White EdgeLite LED, Starter-Sign Kit All Starter Sign Kits come with 1/8" ChemCast Plastic, Flour color of your chose and a White LED Light Strip with a 110vAC power supply. The LED Light Strip clips on to the bottom edge of the sign.
|
||
Kit comes complete with Clear 1/4" ChemCast Acrylic Plastic, RGB EdgeLite Strip, Wireless Controller and 110vAC Power Supply. Ready to reverse engrave, bending with a Plastic Bending Strip Heater, http://www.lasersketch.com/strip%20heater.htm, After Reverse Engraving, Clip on the RGB LED LiteStrip, Plug in to 110 vAC to make your own POP Sign or a Custom Made Sign for your Customers. The bender is easy to fabricate at a fraction of the cost of a commercial bender. All sign stock comes with the corners rounded and fire polished edges, ready for reverse engraving, bending and plugging in to 120vAC.
There are no products listed under this category.