Shop by Category

LaserGrade ColorFill

LaserGrade - ColorFill


Specially formulated for use on Marble and/or Granite Stone and Glass after lasering to high-lite the Lasered Area.

 

Use a Microfiber Fabric Tipped Swab to apply a small amount to lasered area and then wipe off excess with cotton or paper towel.  Back-fill material is very thick and goes a long way: Do not remove the top skim, just punch thru the skim:

Clean-up: The solvent for the ColorFill is Xylene, sometimes sold under the trade name of Xylon. Can be found in most paint stores. Clean Up Immediately after use. Gloves should always be worn with the below materials.  If you should get some of the ColorFill on your skin you can use Orange Goop Hand Cleaner a Natural Citrus cleaner.