 |
|
Home - Catalog -
Check Here to View Cart
-
LaserGrade Laser Supplies
|
Laser Supplies - Color Fill, Masking Paper, Optical Cleaning
Kits, Wall Fasteners to Power Sprayers for CerMark
|
 |
|
Skidmore’s Leather Cream is an all
purpose leather care product which cleans, conditions,
and protects all types of leather. Regular use will
build a degree of waterproofing on the leather. Use on
saddles, tack, chaps, shoes & boots, purses, motorcycle
leathers, saddlebags, car upholstery, and leather
furniture. Our Leather Cream brings dry, curled, cracked
leather back to life and protects all leather from the
harsh effects of the environment…sun, wind, dryness, and
moisture. Leather is a tough material, but it needs to
be cared for…......protect your investment with
Skidmore’s Leather Cream. |
|
|
|
Rub 'n Buff Metallic Back Fill:
Made from imported carnauba waxes, fine metallic power, and select pigments: Rub 'n Buff high-lite and back-fills the Laser Engraved Areas for color and contrast:
|
|
|
|
Van-Son CML-Oil Base Plus, Back-Filling Ink :
Specially formulated for use on Marble and/or Granite Stone
and Glass after lasering to high-lite the Lasered Area. Use a cotton Q-tip to apply to
Lasered area and thin rub off excess with paper towel.
|
|
|
|
TransferRite Paper Masking Film for Lasering :
Specially formulated for use on Marble and/or Granite Stone. Laser and then High-Lite the Lasered Area. Easy Application, Terrific Lay flat, Cost-effective: Use our 24k Gold Back-Filling Spray Coating: (add 3% to laser brightness when used).
|
|
|
|
24 Karat Gold Back-Fill Aerosol Spray:
Specially formulated for use on Marble and/or Granite Stone. Use TransferRite Paper Mask above, Laser and thin spray with 24 karat gold back fill spray for that gold leaf affect.
|
|
|
 LaserSketch's, Optics Cleaning Kit
Specially designed for cleaning Laser Optics: Lens Cleaning Fluid,
Ultra-Soft Brush, Swab It's,
Soft-Tek Micro Fiber Cleaning Cloth and Optical
Tissues.
|
|
 |
|
LaserLoupe, 10x Magnifier: If you are a
Laser Engraver and do not have a Loupe, you need a LaserLoupe.
The second most use tool in our laser lab, next to
our Optics Cleaning Kit. With only two to three
passes of the laser you can examine the laser burns on your engraving material to see if you have
the correct settings. The LaserLoupe pays for
it's self on the first resetting of your laser.
Stop Ruining Material.
|
|
 |
|
Swab It's to clean your Laser Lens without scratches. We have found wood fibers in our cotton swabs which scratched our Laser Lens. We have not damaged one lens since using Swab It's. They are double ended. Use with Ethyl alcohol to clean Laser Lens. They are lint-free and non-abrasive. They are perfect for cleaning those hard-to reach places. They won't harm delicate surfaces.
20 Double End Swab It's, per package; |
|
 |
|
To drill mounting holes in Marble or Granite
plaque so as to mount onto a wall: One-Quarter inch
Diameter Diamond Drill and Mandrel for Electric Drill. Drill hole 3/4"
on center from edges of Marble or Granite; Use a
Spray Bottle of Water to keep drill cool. Use
Mounting hardware found below. |
|
 |
|
Snap-Caps:
An outside diameter of 5/8", For most screws in size
#10, #12, #14, and 1/4" (metric M5 and M6), Black
in
color to match Absolute Black Marble and Super Black
Granite
|
|
 |
|
Self-Drilling
Drywall Anchors: One-piece self drilling anchor
designed for optimal holding performance in gypsum
wallboard. Ideal anchor for 3/8", 1/2" and 5/8"
gypsum wallboard
|
|
 |
|
Mechanical Anchors: Mechanical anchors for fastening
to concrete, block, brick, and tile |
|
 |
|
Concrete Screw: Fast installation, drill a hole &
drive an anchor |
|
|
|
Preval Spray
Gun: Used in spraying CerMark Metal marking
solution. CerMark Metal Marking Solution is
compatible with all CO2 laser engraving machines and
provides an cost effective method to mark metals
such as stainless steel. Purchase your CerMark concentrated
solution, dilute 50% with alcohol. Recap the storage
bottle for latter use. Be sure to clean the spray
gun with warm water.
Power Unit will spray up to 16 oz of product.
Power Unit contains no CFC's
|
|
 |
|
DPN: Dust Off Plus
Special Application,
Specially designed for applications
where flammability is a concern. Ideal for Laser
Laboratories and other potentially combustible
areas. Comes with patented 360 degree Vector Value
for cleaning small or hard-to-reach areas. 100%
ozone safe. DPN is a nozzle plus replaceable
canister system.
DPNR:
Dust-Off Plus Special Application Refill.
|
|
|
|
|
LaserSketch Ltd
1319
Enterprise
Romeoville, Illinois
60446-1050
630-243-6360...FAX...630-243-6908 |
|
|
Last Updated:
07/13/2010
|
|