ADVANTAGE BASE 1 Unique extractors designed to allow manufacturer's laser engravers to sit on top of the units. Blower with high airflow and pressure Filters with long life and low replacement cost Easi-Glide filter location mechanism Noise levels less than 60dBa Optional VOC gas sensors Advanced stop/start interface

Advantage Base 1 has been designed so that a number of manufacturer's laser engravers can sit on top of the extractor, effectively doubling it up as a work station.  Base 1 has the option of an onboard Air assist to remove heat and combustible gasses from the work area for a compact installation. The Base 1 unit benefit from manual speed control. BOFA's patent pending Easi-Glide filter location mechanism makes filter change easy, quick and safe.

PART NUMBERS
Model			24V Stop / Start	Filter change / System failure signal	VOC Monitoring	Compressor	Automatic Closed Loop Flow Control System
AD Base 1	230V	L1042A	A2001	A2002	A2003	A2007	A2006
	115V	L1041A
All of the above units are fitted with our standard filter combinations. For specific applications please contact us direct.

 

HOSE KITS
Model	Hose Kit*	Hose Kit*
AD Base 1	A1020020: 4"- 4" kit	A1020010: 4" - 3" kit
* Other Hose Kits are available.

 

Part Number: A1020020 1 1.5m -  4" Flexible Hose 2 Connection Cuffs	Part Number: A1020017 1 1.5m -  3"  Flexible Hose 2 Connection Cuffs
Part Number: A1020010 1 1.5m - 4" Flexible Hose 2 Connection Cuffs 3 4" - 3" Reducer	Part Number: A1020050 1 1.5m - 4" Flexible Hose 2 Connection Cuffs 3 3" - 4" Reducer

 

REPLACEMENT FILTERS AND ACCESSORIES*
Model	Pre Filter	2nd Pre Filter	HEPA filter	Disposable Gas Filter 50L	Refillable Gas Filter Tray	25kgs Refill Bag of Carbon	Combined Filter
AD Base 1	A1030077	N/A	A1030078	A1030061	A1030063	A1030064	N/A
* Other Filters are available. Please call us for details. N/A = Not Applicable

 

TECHNICAL DATA
Model	Base 1
		US
Dimensions (hxwxd)		31.7" x 27.4" x 26.6"
Weight		189lbs
Cabinet Construction		Powder coated mild steel
Blower		1.1kw 235cfm
Electronics		115v 50/60Hz Full load current:14.4 amps

 

BASE 1 - FILTER SPECIFICATION
	Pre Filter	HEPA Filter	Gas Filter
Part Number	A1030077	A1030078	A1030061
Filter Media	Polyester	Glass Fiber	Impregnated Carbon 55 Pounds
Surface Area	24 Sq. Ft.	81 Sq Ft	N/A
Construction	8 Pocket	Maxi Pleat	Granules
Housing	Polyester	Mild Steel	Mild Steel
Efficiency	EU6 (85% @ 0.8 microns)	H13 (99.997% @ 0.3 microns)	N/A

BASE 1 PRE FILTER

BASE 1 Gas and HEPA FILTER

COMPONENTS DIAGRAM
Base 1
1. Unit/Filter Condition Display 2. On/Off Switch 3.Filter Housing Cam Latch 4. Extracted Air Outlet	5. Hose Inlet Connection 100mm 6. Signal/ Interface Cable to Laser 7. Power Cable 8. Motor Cooling Inlet	9. Motor Cooling Outlet 10. Compressed Air Outlet 11. Castors 12. Door Hinges 13. Machine Identification