ADVANTAGE BASE C180 For use with the GCC C180 LaserPro Laser Engraver. Noise Level less than 55dBa Filters with long life and low replacement costs. Stylish color match with C180 On Board compressor versions Comes complete with extraction hose kit

The Advantage Base C180 has been designed specifically for the new GCC C180 laser engraver. The dimensions of the unit allow the C180 to fit perfectly onto the extractor, effectively doubling it up as a work station. The distinctive blue finish has been matched with the silver of the laser to give a stylish installation. The unit is also offered with an onboard air compressor to provide the laser its air assist requirements. All units come complete with extraction hose kit and compressor link up on compressor models.

PART NUMBERS
Model			VOC Monitoring	Compressor
AD BASE C180	230V	L2142A	A2003	A2007
	115V	L2141A

 

REPLACEMENT FILTERS AND ACCESSORIES*
Model	Pre Filter	Combined HEPA / Gas Filter
AD BASE C180	A103007	A1030050
* Other Filters are available. Please call us for details.

 

TECHNICAL DATA
Model	AD BASE C180
Dimensions (hxwxd)		31.3 x 28.3 x 26.6"
Weight		190lbs
Cabinet Construction		Powder coated mild steel
Blower		135w
Electronics		115v 50/60Hz Full load current: 1.2 amps

 

FILTER SPECIFICATION
Model	AD BASE C180
	Pre Filter	Combined Filter
Part Number	A1030077	A1030050
Filter Media	Polyester	Glass Fiber, Activated Carbon 9kg
Surface Media	2.2mē	2mē
Construction	8 Pocket	Metal Case
Housing	Polyester	Mild Steel
Efficiency	EU6 (85% @ 0.8 microns)	H13 (99.997% @ 0.3 microns) Multiple Gas

AD BASE C180 Pre Filter

AD BASE C180 Combined Filters

COMPONENTS DIAGRAM
BASE C180
1. Unit/Filter Condition Display 2. On/Off Switch 3. Filter Housing Cam Latch 4. Extracted Air Outlet 5. Hose Inlet Connection 100mm 6. Signal/ Interface Cable to Laser 7. Power Cable	8. Motor Cooling Inlet 9. Motor Cooling Outlet 10. Compressed Air Outlet 11. Castors 12. Door Hinges 13. Machine Identification