Base 3 illustrated with ULS VersaLASER

ADVANTAGE BASE 3 Unique extractors designed to allow manufacturer's laser engravers to sit on top of the units. Blower with high airflow and pressure Filters with long life and low replacement cost Easi-Glide filter location mechanism Noise levels less than 60dBa Optional VOC gas sensors Advanced stop/start interface

The Laser Advantage Base 3 has been designed so that a number of manufacturer's laser engravers can sit on top of the extractor, effectively doubling it up as a work station. Base 3 has the option for an onboard Air assist to remove heat and combustible gasses from the work area for a compact installation. BOFA's patent pending Easi-Glide filter location mechanism makes filter change easy, quick and safe.

PART NUMBERS
Model			24V Stop / Start	Filter change / System failure signal	VOC Monitoring	Compressor	Automatic Closed Loop Flow Control System
AD Base 3	230V	L0342A	A2001	A2002	A2003	A2007	A2006
	115V	L0341A
All of the above units are fitted with our standard filter combinations. For specific applications please contact us direct.

 

HOSE KITS
Model	Hose Kit*	Hose Kit*
AD Base 3	A1020050  3"- 4" kit	A1020017  3" - 3" kit
* Other Hose Kits are available.

 

Part Number: A1020020 1 1.5m  4" Flexible Hose 2 Connection Cuffs	Part Number: A1020017 1 1.5m  3" Flexible Hose 2 Connection Cuffs
Part Number: A1020010 1 1.5m  4" Flexible Hose 2 Connection Cuffs 3 4" - 3" Reducer	Part Number: A1020050 1 1.5m  4" Flexible Hose 2 Connection Cuffs 3 3" - 4" Reducer

 

REPLACEMENT FILTERS AND ACCESSORIES*
Model	Pre Filter	2nd Pre Filter	HEPA filter	Disposable Gas Filter 50L	Refillable Gas Filter Tray	25kgs Refill Bag of Carbon	Combined Filter
AD Base 3	A1030045	N/A	N/A	N/A	N/A	N/A	A1030050
* Other Filters are available. Please call us for details. N/A = Not Applicable

 

TECHNICAL DATA
Model	Base 3
		US
Dimensions (hxwxd)		30.1" x 26.8" x 18.5"
Weight		143lbs
Cabinet Construction		Powder coated mild steel
Blower		0.35kw 117cfm
Electronics		115v 50/60Hz Full load current: 1.2 amps

 

BASE 3 - FILTER SPECIFICATION
	Pre Filter	Combined Filter
Part Number	A1030045	A1030050
Filter Media	Glass Fiber	Glass Fiber, Activated Carbon
Surface Area	12mē	2.2mē
Construction	Maxi Pleat	Metal Case
Housing	MDPE Molding	Mild Steel
Efficiency	EU8 (95% @ 0.8 microns)	H13 (99.997% @ 0.3 microns) Multiple Gas

BASE 3 PRE FILTER

BASE 3 Combined FILTER

 

COMPONENTS DIAGRAM
Base 3
1. Unit/Filter Condition Display 2. On/Off Switch 3. Motor Cooling In/Out 4. Compressor Cooling Inlet	5. Exhaust Inlet Connection 75mm 6. Exhaust Outlet 7. Power Cable 8. Compressed Air Outlet 9. Locating Dimples for Laser Cabinet	10. Filter Compartment Door Latches 11.Castors 12. Door Hinges 13. Machine Identification